|
|
NAV Lights |
|||||||||||||||||||||||||||
Page 1 |
|||||||||||||||||||||||||||
I intend to use AeroFlash's
NAV / Position /Strobe assemblies, model 152-0049.
|
. |
|
|
||||||||||||||||||||||||
My landing lights will be a set of small rectangular car driving lamps |
|
||||||||||||||||||||||||||
Here are my main spar WAFs and my electrical connectors for the NAV/POS/STROBE lights and a BNC connector for the NAV antenna. The electrical connector is a four pin automotive trailer coupling. It has a cover with a built in locking detent. With the addition of a small hole and a piece of safety wire I have no concerns about this set up. A 2"x 2" aluminum angle makes the bracket. |
|
||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
