|
Micro Monitor Assembly
|
|
Page 1
|
| |
The
Rocky Mountain microMONITOR has 22
different functions including manifold pressure, tachometer, exhaust gas
temperature, cylinder head temperature, oil temperature, carburetor temperature,
ammeter, voltmeter, oil pressure, fuel pressure and outside air temperature.
An integral turbine-sensor fuel totalizer provides fuel flow, fuel quantity
remaining and time to dry tanks. This will replace all but my fuel gauges.
The CHT/EGT will have a 6 position selector switch to read each cylinder.
|
|
|
|
|
|
|
This is everything that comes
with the kit with the addition of a carb temp sensor.
Join me as I put together
my kit.
|
|
|
|
|
|
Here are the three manuals
you get in the kit. An assembly manual, installation manual, operations
manual and a pack of drawings. Check them out and make any corrections
to the manual that come with the kit. Remember to take your time and double
check everything.
Most of all do not skip steps
in the process!
|
|
|
|
|
|
The first thing you need to
do is clean both Printed Circuit cards of any fingerprint or machining
oils. Dry them with compressed air or a hair dryer.
|
| |
|
|
|
|
|
